• Perfect for all basic barbell and dumbbell exercises
Learn More

Our deluxe 2-tier horizontal dumbbell rack wil store a full 10 pair  ranging from 5 lbs. to 50lbs.

Learn More

Build awesome shoulders, thicker delts, and killer triceps on our freestanding Dip Station.

Weight plates, bar and collars optional

Learn More

Specifically designed with a shortened base frame to fit perfectly in all Smith Machines, Power Racks and Multi-Press Racks.

Learn More

Featuring full-length steel reinforced back and seat pads that provide double incline adjustments, it's perfect for a variety of barbell and dumbbell exercises.

Learn More

It's a combination inverted back extension and oblique flexor set at an exact 45° angle for ultimate conditioning.

Learn More

The BodyCraft Hyper-extension/ Roman Chair adjust from a flat position to a 45 degree position.

Learn More

The Bodycraft F320 Weight Bench is specifically designed to use with any smith machine, squat rack or power rack with a unique design that actually slides the bench backward underneath the bar as it inclines so you don't have to move it and waste time.

Learn More

Preacher curls are essential for building overall biceps mass including the often difficult lower biceps. Our preacher curl bench is set to a perfect 30° angle. Weight plates, bar and collars optional.

Learn More

Learn More

The heavy-duty 2" x 3" steel frame can easily handle a load capacity of 1,000 Lbs while supporting you comfortably through the most intense workouts. Full Commercial Warranty.

Learn More

All new for 2010, the Ab Coaster PS 750 is the top of the line Ab Coaster in the Personal Series for residential use.

Learn More

Increased comfort through contoured high-resilient foam cushions
Secure seating for overhead movements from 85° degree back pad angle
Solid stability through non-skid rubber surfaces on all floor contact points
Ultimate stability option through permanent floor anchoring capability.

Learn More

Strategically located plate holders that allow 45lb plates to be placed in all locations
Solid stability through non-skid rubber surfaces on all floor contact points
Quiet racking of weight plates through urethane molded shaft covers and molded rubber cushions
Ultimate stability option through permanent floor anchoring capability.

Learn More

Strategically located plate holders that allow 45lb plates to be placed in all locations
Solid stability through non-skid rubber surfaces on all floor contact points
Quiet racking of weight plates through urethane molded weight plate holders and molded rubber cushions
Ultimate stability option through permanent floor anchoring capability.

Learn More

Increased comfort through high-resilient foam cushions
Solid stability through non-skid rubber surfaces on all floor contact points
Ultimate stability option through permanent floor anchoring capability.

Learn More

Easiest-to-adjust dumbbell system bench around. Seven different positions from decline to flat to incline. Extremely solid and stable.

Learn More

A modern, multi-purpose bench designed to work with Functional Trainers, Free-Weight Systems, and Dumbbells.

Perfect bench to use with the Bodycraft PFT.

Learn More

This commercial 10 pair rack has a rugged 3” x 2“ frame with a scratch resistant powder coat finish and anatomically angled tiers for easy access.

Learn More

This is the tool of the trade for building depth in the middle back and training the hard to reach lower lats. Our uniquely designed Seated Row Machine is fully adjustable to fit all size users.

Weight plates and collars optional

Learn More

By doing pull-ups chin-ups and dips, you can effectively and efficiently build muscles in your arms, shoulders and back.

Learn More

This unique dual-function machine allows you to exercise two major muscle groups (the stomach and back) for one great low price.

Learn More

Leg workouts have never been so quick and efficient. The two most important leg exercises can now be performed from one comfortable position.

Weight post is 1" dia. Shown with optional Olympic Adapter Sleeve, weight plates and collars.

Learn More

Designed with an extra-wide 4-point stance, the GPR370 is a rock-solid performer that features a 7° reverse pitch that accommodates your body's natural lifting path.

Weight plates, bar and collars optional

Learn More

A combination of user-friendly ergonomic design and advanced biomechanical engineering, the GSCR349 was created to increase calf muscle interaction and speed the rate of development.

Olympic Adapter Sleeves, weight plates, and collars optional

Learn More

•2"x3" heavy duty 11 gauge mainframe construction
• 1/4" zinc plated solid gunracks
• Durable double stitched upholstery
• Electrostatically applied powdercoat paint finish , metallic silver

Learn More

•2"x3" heavy duty 11 gauge mainframe construction
• 1/4" zinc plated solid gunracks
• Durable double stitched upholstery
• Electrostatically applied powdercoat paint finish, metallic silver

Learn More

•2"x3" heavy duty 11 gauge mainframe construction
• 1/4" zinc plated solid gunracks
• Durable double stitched upholstery
• Electrostatically applied powdercoat paint finish, metallic silver

Learn More

The Body-Solid Pro Power Rack is designed to work with all types of benches and engineered for extreme workouts.

Learn More

• 2”x3” heavy duty 11 gauge mainframe construction
• 1/4”zinc plated solid gunracks
• Durable double stitched upholstery
• Electrostatically applied powdercoat paint finish , metallic silve

Learn More

The U-50 Club Set has a weight range of 10-50 lbs per hand and will replace 9 pairs of dumbbells or 540 lbs of free weights.

Shippable within Columbus, OH only.  Call store for more information.

Learn More

Solid stability through non-skid rubber surfaces on all floor contact points
Ultimate stability option through permanent floor anchoring capability.

Learn More

Comfortable racking and removal of weights from angled trays
Solid stability through non-skid rubber surfaces on all floor contact points
Ultimate stability option through permanent floor anchoring capability.

Learn More

Simple spring pin adjustment that allows for knee pad height
Increased comfort through high-resilient foam cushions
Solid stability through non-skid rubber surfaces on all floor contact points
Ultimate stability option through permanent floor anchoring capability.

Learn More

Simple one handed adjustment for 0°, 15°, 30°, 45°, 60° and 75° back pad angles
Increased comfort through contoured high resilient foam cushions
Molded rubber grip handle and wheel for easy mobility
Solid stability through non-skid rubber surfaces on all floor contact points
Ultimate stability option through permanent floor anchoring capability.

Learn More

A comfortable fit to arm length through multiple weight take-off points
Clearance during lift and easier racking from inward angled uprights
Increased comfort through contoured high-resilient foam cushions
Solid stability through non-skid rubber surfaces on all floor contact points
Ultimate stability option through permanent floor anchoring capability.

Learn More

Simple spring pin adjustment that allows for four adjustments from -10 to -25°
Increased comfort through large diameter roller pads
Molded rubber grip handle for easy entry and exit
Solid stability through non-skid rubber surfaces on all floor contact points
Ultimate stability option through permanent floor anchoring capability.

Learn More

• Rugged 11 gauge, 2" x 3" steel tubing
• Easy spring pin adjustments on Safety Spotters and Bar catches
• Chin up bar

Learn More

Comfortable racking and removal of weights from angled trays
Solid stability through non-skid rubber surfaces on all floor contact points
Ultimate stability option through permanent floor anchoring capability.

Learn More

Increased comfort through contoured high-resilient foam arm and back pads
Optimal stablization throughout range of motion from 15° back pad angle
Ergonomically angled molded rubber grip handles for secure grip
Solid stability through non-skid rubber surfaces on all floor contact points
Ultimate stability option through permanent floor anchoring capability.

Learn More

A standing arm curl suitable for users of all sizes with no adjustments
The ability to use the bench from both sides utilizing either 50 or 85° pad angles
Increased comfort through the high-resilient foam cushion
Solid stability through non-skid rubber surfaces on all floor contact points
Ultimate stability option through permanent floor anchoring capability.

Learn More

• 2" x 3" 11 gauge steel mainframe
• Electrostatically applied powder coat paint finish, metallic silver
• Durable double stitched upholstery
• Sealed bearing pivot points
• Adjustable press arms to fit all size users, with gas assisted start positions
• Ergonomic hand grip positions
• Weight plate holders for plate storage
• Converging press arm movement for advanced biomechanics
• Independent, unilateral arm action for balanced muscle development
*Olympic weight plates not included

Learn More

A comfortable fit to arm length through multiple weight take-off points
Clearance during lift and easier racking from inward angled uprights
A 30° back pad angle to target upper pectoral muscles
Increased comfort through contoured high-resilient foam cushions
Ratcheting spring pin seat for effortless adjustments
Solid stability through non-skid rubber surfaces on all floor contact points
Ultimate stability option through permanent floor anchoring capability.

Learn More

Spring pin adjustment with rotating slide mechanism that allows for simple and stable adjusments
Increased comfort through contoured high-resilient foam cusions and large diameter roller pads
Molded rubber grip handles for easy entry and exit
Secure foot placement through molded rubber platform
Solid stability through non-skid rubber surfaces on all floor contact points
Ultimate stability option through permanent floor anchoring capability.

Learn More

• 2" x 3" 11 gauge steel mainframe
• Electrostatically applied powder coat paint finish, metallic silver
• Durable double stitched upholstery
• Sealed bearing pivot points
• Direct link movement arm design enhances smooth and continuous range of motion
• V-bench design provides total hamstring isolation. Helps reduce back stress and unwanted knee forces
• Adjustable foot rollers to accommodate all user sizes
• Side handles for stability and control
• Weight plate holders for plate storage

Learn More

• 2" x 3" 11 gauge steel mainframe
• Electrostatically applied powder coat paint finish, metallic silver
• Durable double stitched upholstery
• Sealed bearing pivot points
• Adjustable press arms to fit all size users, with gas assisted start positions
• Adjustable seat pad with gas assist
• Ergonomic hand grip positions
• Converging press arm movement for advanced biomechanics
• Independent, unilateral arm action for balanced muscle development
• Weight plate holders for plate storage

Learn More

An indoor cycle that delivers a smooth and quiet ride.

Learn More

• 2" x 3" 11 gauge steel mainframe
• Electrostatically applied powder coat paint finish, metallic silver
• Durable double stitched upholstery • Sealed bearing pivot points
• Adjustable press arms to fit all size users, with gas assisted start positions
• Adjustable seat pad with gas assist
• Ergonomic hand grip positions
• Converging press arm movement for advanced biomechanics
• Independent, unilateral arm action for balanced muscle development
• Weight plate holders for plate storage

Learn More

• 2" x 3" 11 gauge steel mainframe
• Electrostatically applied powder coat paint finish, metallic silver
• Durable double stitched upholstery
• Sealed bearing pivot points
• Direct link movement arm design enhances smooth and continuous range of motion
• Adjustable foot roller to accommodate different leg lengths and start position
• Gas assist back pad adjustment
• Weight plate holders for plate storage

Learn More

Lat attachment for Bodycraft Jones.  Lat pull down, low row, and 200 lb stack.

Learn More

A comfortable fit to arm length through multiple weight take-off points
Clearance during lift and easier racking from inward angled uprights
A -15° back pad angle to target lower pectoral muscles
Increased comfort through high-resilient foam cushions and large diameter roller pads
Spring pin adjustment with rotating slide mechanism that allows for simple and stable adjusments
Solid stability through non-skid rubber surfaces on all floor contact points
Ultimate stability option through permanent floor anchoring capability.

Learn More

Durable universal joint pivot for smooth fluid motion
Increased comfort through contoured high-resilient foam cusions
Dual position molded rubber grip handles for exercise variation
Secure foot placement through molded rubber platform
Solid stability through non-skid rubber surfaces on all floor contact points
Ultimate stability option through permanent floor anchoring capability.

Learn More

• 2" x 3" 11 gauge steel mainframe
• Electrostatically applied powder coat paint finish, metallic silver
• Durable double stitched upholstery
• Sealed bearing pivot points
• Dual axis diverging arm movement for biomechanically correct lat pull downs
• 360 degree articulating hand grips for free floating downward pulling motion
• Adjustable leg hold down pads
• Gas assisted seat adjustment
• Weight plate holders for plate storage

Learn More

• 2" x 3" 11 gauge steel mainframe
• Electrostatically applied powder coat paint finish, metallic silver
• Durable double stitched upholstery
• Sealed bearing pivot points
• Adjustable seat pad with gas assist
• Dual axis diverging arm movement provides a biomechanically correct back exercise
• 360 degree articulating hand grips provide definition and natural range of motion
• Gas assisted chest support for various arm lengths and total isolation of back muscles
• Independent unilateral arm movement
• Weight plate holders for plate storage

Learn More

The RevMaster is manufactured to the most exacting standards - with 100% of all bikes tested prior to final packaging to insure customer satisfaction. This allows us to offer you an exceptional warranty.

Learn More

Body-Solid engineers knew that the best way to build an explosive lower body, and stay that way, would be to make your workouts incredibly Powerful... Comfortable... and Safe.

Olympic style plates only. Weight plates optional.

Learn More

The SMR1000 commercial multi rack system is the perfect machine for providing all size users a safe and comfortable platform to maximize squats and pressing motions. ¼” solid steel gun rack style liftoffs provide multiple positions for a comfortable starting position. Rock solid adjustable safeties allow users to workout safely and maximize their load. The 2”x3” 11-gauge steel frame holds up in any heavy use environment. The back frame is extended to allow spotters easy access. Integrated weight storage keeps the plates right where you need them. The SMR1000 has integrated pegs for strength bands for extreme plyometric training. The integrated chinning bar allows users to incorporate pull ups, chin ups, inversion, ab slings and other body weight resistance systems for amazing versatility. The SMR1000 is an uncompromised monster free weight system. The SMR1000 muti-rack system is perfect for heavy use, heavy load environments, like schools, military, police and fire departments.

Dimensions: 89"H x 80"L x 71"W

Learn More

The SPX Indoor Cycle is unsurpassed in quality and durability. This is a great bike for any type of gym big or small. The SPX Indoor Cycle is built to hold up to the toughest work-outs without breaking a sweat.

Learn More

A comfortable fit to arm length through multiple weight take-off points
Clearance during lift and easier racking from inward angled uprights
Secure seating for overhead movements from 80° degree back pad angle
Increased comfort through contoured high-resilient foam cushions
Solid stability through non-skid rubber surfaces on all floor contact points
Ultimate stability option through permanent floor anchoring capability.

Learn More

An indoor cycle designed for heavy club-use.

*Sale Price is for floor model sale. Item can be shipped, but buyer must arrange shipping. Product will ship fully assembled.

Learn More

The U-90 Club Set has a weight range of 5-90 lbs per hand and will replace 18 pairs of dumbbells or 1710 lbs of free weights.

Shippable within Columbus, OH only.  Call store for more information.

Learn More

The Series 7 Smith Machine. Set to a 7-degree reversed pitch, the Series 7 allows natural upper and lower body movements for maximum muscle interaction; a feature not found in the traditional Smith Machine.

Olympic style plates only. Weight plates optional.

Learn More

With its weight-assisted kneepad mechanism, the Fusion Chin-Dip provides the same benefits of chin and dip exercises to everyone, regardless of their current fitness level or weight.

Learn More

Walk-through design

Adjustable angle nylon mesh seatback

Resistance control in seat handle

Integrated console cooling fan and bottle caddy

Heart Rate Control programming

Learn More

Define the motions that are right for you and your individual workout goals with the Body-Solid GDCC210 Functional Training Center. This dual independent weight stack system provides dedicated resistance with true isolateral movements.

Shown with optional accessory GDCC Rack (removable bar just under the Body-Solid logo)

Learn More

The Selectorized Deluxe Cable Crossover's unique pull-up station offers multiple grip positions, and dual independent carriages have been ergonomically designed to offer twice as many height adjustments as previous Body-Solid crossover stations.

Learn More

Define the motions that are right for you and your individual workout goals with the Body-Solid GDCC200 Functional Training Center. This dual independent weight stack system provides dedicated resistance with true isolateral movements.

Learn More

Easy-To-Use Console w/40 Resistance Levels

Micro Adjust Seat w/ Fore/Aft Positioning

Heavy-Gauge Steel Frame

Integrated Generator/Flywheel Resistance System

Durable Powder-Coated Paint

Contact & Telemetric Heart Rate

Commercial Warranty

Learn More

Impressively versatile, the Pro Club Lat Machine is a favorite for gym and club use. Extraordinary capabilities set this machine apart. For starters, you get a high pulley directly overhead for optimum back and shoulder isolation. The extra long pulldown bar allows you to choose wide, medium or narrow handgrip position for maximum development. No-cable-change design allows you to go immediately and directly to a Long Pull / Seated Row exercise movement to further increase size, strength and endurance of your back muscles. Adjustable hold-down pads stabilize you for lifts beyond your body weight. Unique styling, space efficient design, exceptional performance and versatility make this Lat Machine a standout in any gym, club or institution.

Learn More

This Leg Curl Machine sets the standard for workout comfort and convenience. There’s not just ample strength, but highly regarded performance. And not just a comfortable workout, but one that can only be described as remarkably smooth. Compelling proof that a high quality, proven design never goes out of style. Uniquely engineered center-drive cam distributes weight evenly to eliminate lateral torque. Biomechanically accurate pivot point ensures ergonomically correct body positioning for natural and complete Hamstring and Leg Biceps development. Elliptical cam keeps arc of movement smooth and provides variable resistance through full range-of-motion. Pop-pin adjustable foot pads assure proper alignment. Finally, a form-fitting machine that is big on strength, style and performance.

Learn More

A machine of enormous power and durability. True to Body-Solid tradition, this is no ordinary Leg Press Machine—it uses sophisticated pillow block and sealed ball-bearings for precision alignment and friction-free movement. This allows you to achieve higher performance results. Advanced design reduces spinal compression while allowing full range-of-motion in a natural biomechanical movement. Fully adjustable DuraFirm™ back pad with an ergonomically designed two position press plate accommodates all-size users for a complete Leg and Calf workout. For truly enormous muscle capacity, look no further than this machine. It’s designed to last—even under the most strenuous routines.

Learn More

When you’re ready to build muscular legs and stronger knee joints, the Leg Extension Machine is ready to help you meet your goals. The exceptionally strong mainframe combined with a specially contoured DuraFirm™ thigh pad and biomechanically exact movement pattern provide a smooth, solid feel and immediate response. Precise pivot point alignment and center-drive, variable resistance cam design deliver the smooth and powerful response you expect. Recumbent DuraFirm™ back pad adjusts for all-size users and eliminates lower back strain while allowing full range-of-motion. Pop pin adjustable foot pads assure proper alignment. Hold down grips provide ultimate stability for a worry-free workout. No compromises here, this machine was engineered to deliver strength, comfort and safety.

Learn More

Built to deliver strength—and deliver it does. Structurally and biomechanically designed for intensive club use, the Chest Press’ rigid body structure plays a critical role in the machine’s superb handling. Its large base frame aids stability and comfort, and yields a neutral weight distribution. Substantial rear and side subframes help eliminate lateral torsion and vibration. Kick-assist lever allows you to move the handgrips into comfortable Start and Finish positions for a complete pre-stretch and full range-of-motion without straining.

Biomechanically designed for maximum chest concentration and outstanding muscle development. Comfortable, multi-position handgrips concentrate distinct areas of the Chest and Triceps. This Chest Press has all the essential components for a great workout experience.

Learn More

You can expect nothing but the best from this machine. Pop-pin cam adjustment allows users to select starting position and range-of-motion. Features four sealed pillow block ball-bearing systems for smooth, comfortable Inner Thigh and Hip concentration.

Provides pinpoint outer thigh concentration with additional emphasis on hips and glutes. Oversize DuraFirm™ pads, biomechanically accurate foot posts and ergonomically correct bent-knee design make your workouts safe, comfortable and more effective. Angled seat eliminates lower back stress while no-slip hand grips assure stability.

NOTE: This machine is either an Inner or an Outer Thigh Machine. The basic unit can be configured to be used as one or the other, not both. In order to have both an Inner and Outer Thigh Machine, two units would need to be purchased.

Learn More

Functional training can prove effective for individuals who need to improve balance, stability and neuromuscular coordination. The Body-Solid Pro•Dual Adjustable Cable Column offers you the freedom of movement to effectively, efficiently conduct numerous weight bearing activities targeting core muscles of the abdomen and lower back.

The Body-Solid Pro•Dual Adjustable Cable Column is an achievement in design and engineering that stacks a virtually unlimited range of exercises into a compact 3' by 4' footprint. With a simple pop-pin adjustment, the vertically adjustable pulleys can be set for over 100 exercises at a level that is comfortable for any size user. It can be used as a freestanding unit or as a modular component to the Pro•Dual 3-Stack and 4-Stack multi-station systems.

The Pro•Dual Adjustable Cable Column features a sleek, structural tube frame with a durable, powder-coated finish that exhibits a modern, design-forward aesthetic. Full shrouds and covers ensure an extra measure of safety while enhancing its modern aesthetics.

The Pro•Dual Adjustable Cable Column features impact-resistant fiberglass reinforced nylon pulleys, including precision ground and sealed bearings to ensure prolonged cable life and smooth movement. 11-gauge 2.375" x 4.625" oval tubing on the main frame, combined with 3-gauge steel connecting plates and ½" diameter connecting bolts adds to the machine's strength and durability.

The spun steel aircraft cables of the Pro•Dual Adjustable Cable Column are 5.5mm in diameter and are rated to over 2500 lb., providing smooth movement and a safe workout.

Durable, electrostatically applied metallic powder coat finish with clear coat is applied to the Pro•Dual Adjustable Cable Column in a two-step process, resulting in a high-quality, low maintenance finish protected from scratching, chipping and fading.

Learn More

The TRUEStretch was developed by internationally renowned physical therapist Gary Gray and is used by a number of top professional and collegiate teams as well as many professional athletes and their personal trainers. It is also featured at many of the top resort spas around the globe because TRUEStretch is the most effective piece of equipment available for maximizing flexibility.

Shippable within designated dealer zone only.  If outside of Columbus, please check the manufacturer website to find the closest dealer. If no dealer within
75 miles, feel free to contact us for a quote.

Learn More

Your leg muscles are the strongest and toughest muscles in your body. BodyCraft has built the F660 Hip Sled with that in mind.

Learn More

The PS100 walk-through recumbent bike is built on a custom-designed, racetrack-inspired steel frame that is a perfect complement to any exercise facility, especially when combined with other cardio pieces in the PS series. TRUE® uses the most durable materials available in this class to ensure that the PS100 will look good for the long haul.

Shippable within designated dealer zone only.  If outside of Columbus, please check the manufacturer website to find the closest dealer. If no dealer within
75 miles, feel free to contact us for a quote.

Learn More

< Easy-To-Use Console w/40 Resistance Levels Easy-To-Adjust 12-position Aluminum Seat Rail Heavy-Gauge Steel Frame Integrated Generator/Flywheel Resistance System Durable Powder-Coated Paint Contact & Telemetric Heart Rate Commercial Warranty

 



Learn More

The first exercise bike you can adjust to fit you. A seat that not only goes up and down but also slides fore and aft. Handlebars that can be adjusted too. Four critical adjustments that insure your workout will not only be more effective, it will be comfortable and feel good too.

Learn More

The LC900 upright bike is built on a custom-designed, racetrack-inspired steel frame that is a perfect complement to any exercise facility. TRUE uses the most durable materials available in this class to ensure the LC900 will look good for the long haul.

Learn More

Functional Cable Column Attachment for Bodycraft Jones.  Does not include lat attachment.

Learn More

Body-Solid revolutionizes the commercial equipment market by providing a modular approach to designing your next training facility. The Pro Dual Line offers 10 dual function stations that can be used in single or multiple stack arrangements. The combinations are endless, allowing you to customize the equipment to best suit your training needs.

The anchor of the multi-station system is the 4 Stack Weight Tower. With positions for 3 or 4 stations, the space saving 4 Stack Tower provides a solid foundation for any of the 10 different Pro Dual stations.

• 4 independent weight stations.
• 4 universal upper and lower station mounts
• 4 universal upper and lower pulley stations
• 4 easy mount chrome guide rods
• 210lb and 310 lb weight stack option

Price is for base frame only, without stations. Must be purchased with 3 or 4 stations.

Learn More

Leverage safety and stay in control of your workouts! The Body-Solid ProClubLine SCB1000 Smith Machine is the ideal partner for a total body workout in any space-challenged facility.
 
Counterbalanced to a comfortable 13 pounds, the SBC1000 allows any size user to start with an appropriate amount of resistance, then handles up to 1,000 pounds with ease. Its reverse pitch and silky smooth vertical carriage ensure freedom of biomechanically correct movement as you move safely and efficiently through routines that can include bench press, chest press, military press, squats, lunges, curls, shoulder shrugs and dozens of other muscle-massing exercises.
 
Oval 11-gauge steel gives the SCB1000 a modern look and fantastic stability. Counterbalances are aesthetically shrouded and protected by gunmetal gray shields. Case hardened rods and club-quality bearings ensure smooth performance at any weight. Add it all up and you've got the perfect smith machine for any facility

Learn More

• 2" x 3" 11 gauge steel mainframe
• Electrostatically applied powder coat paint finish, metallic silver
• Durable double stitched upholstery
• Sealed bearing pivot points
• Direct drive press system for accurate and effective weight resistance
• Large pivoting footplate maintains correct foot position throughout range of motion
• Dual self aligning 1 1/2" linear bearing seat carriage design easily adjusts to accommodate various foot positions
• Fully adjustable back support for proper body alignment and comfort
• Weight plate holders for plate storage

Learn More

A lat machine is an essential piece of equipment for workouts including pull downs, dumbbell rows, bent over rows, chins, “T” bar rows, and seated cable rows.

Body-Solid's Pro•Dual Lat Pulldown with Mid Row Machine is engineered with a high pulley directly overhead for optimum back and shoulder isolation. The extra long pull down bar permits wide, medium or narrow handgrip position.

The Lat Pulldown with Mid Row Machine also features a no-cable-change design to provide seamless transitions between long pull and seated row exercises. Adjustable hold-down pads add stability for lifts beyond that of a user's body weight.

With gracefully curved frames constructed from sleek, power-coated tubing that exhibits a modern, design-forward aesthetic, the Body-Solid Pro•Dual Lat Pulldown with Mid Row Machine builds form into function and value into a superior modular strength training system.

Best of all, you can buy with confidence, because the Pro•Dual Lat Pulldown with Mid Row Machine is built to last a lifetime and is backed by the strongest warranty in the industry!

Learn More

A proper leg workout not only strengthens the glutes, quadriceps, hamstrings and calves, it also works the cardiovascular systems and burns fat.

Body-Solid's Pro•Dual Leg Press/Calf Extension's advanced design reduces spinal compression while allowing full range of motion in a natural biomechanically efficient movement. The machine features pillow block and sealed ball bearings for precision alignment and friction-free motion.

The fully adjustable DuraFirm™ back pad has an ergonomically designed two-position press plate to provide users of every size with a complete leg and calf workout.

With gracefully curved frames constructed from sleek, power-coated tubing that exhibits a modern, design-forward aesthetic, the Body-Solid Pro•Dual Leg Press/Calf Extension builds form into function and value into a superior modular strength training system.

Best of all, you can buy with confidence, because the Pro•Dual Leg Press/Calf Extension is built to last a lifetime and is backed by the strongest warranty in the industry!

Learn More

Now you have the leverage to safely and efficiently build your chest and arms with the Body-Solid ProDual Multi Press. Continuous welded, factory assembled connections on the weight and station frame provide extra stability along with durability that extends the life of the station.

Our ProDual Multi Press features a sleek, structural tube frame with a durable, powder-coated finish that exhibits a modern, design-forward aesthetic. Full shrouds and covers ensure an extra measure of safety while enhancing its modern aesthetics. The Multi Press functions as a modular component on the ProDual 3-Stack and 4-Stack Gyms.

The ProDual Multi Press features impact-resistant fiberglass reinforced nylon pulleys, including precision ground and sealed bearings to ensure prolonged cable life and smooth movement. 11-gauge 2.375" x 4.625" oval tubing on the main frame, combined with 3-gauge steel connecting plates and " diameter connecting bolts adds to the machine's strength and durability.

The spun steel aircraft cables of the ProDual Multi Press are 5.5mm in diameter and are rated to over 2500 lb., providing smooth movement and a safe workout. Industrial-rated, sealed bearings at all major pivot points provide smooth movements and easy adjustments.

To ensure user comfort, the ProDual Multi Press features over 2" of DuraFirm upholstery, double-stitched, fully supported and guaranteed to be tear resistant. High-density rubber foam grips and handles add comfort to the ergonomically correct gripping surfaces, while multiple seat and cushion adjustments provide unlimited positioning for any sized user.

Durable, electrostatically applied metallic powder coat finish with clear coat is applied to the ProDual Multi Press in a two-step process, resulting in a high-quality, low maintenance finish protected from scratching, chipping and fading.

From flat bench to shoulder press, the ProDual Multi Press offers a biomechanically designed solution for people seeking maximum chest concentration and outstanding muscle development.

Learn More

A strong, functional torso requires well-defined abdominals and lower back. A successful workout of these complex muscle groups demands a routine built upon a foundation of consistency.

Body-Solid's Pro•Dual Ab Crunch Back Extension features a unique rotation position that provides correct, crunch-style movement for maximum abdominal contraction. The adjustable seat and foot hold-down rollers permit ergonomically correct pivot positioning.

With gracefully curved frames constructed from sleek, powder-coated tubing that exhibits a modern, design-forward aesthetic, the Pro•Dual Ab Crunch Back Extension builds form into function and value into a superior modular strength training system.

Best of all, you can buy with confidence, because the Pro•Dual Ab Crunch Back Extension is built to last a lifetime and is backed by the strongest warranty in the industry!



Learn More

Developing a lean, muscular chest is an integral part of every weight training routine, and sculpting a full, balanced chest requires a wide array of movements that target muscles from a variety of angles.

Body-Solid's Pro•Dual Pec/Delt Machine's dual overhead variable resistance cams allow each arm to operate independently, providing unilateral and bilateral chest, back and shoulder conditioning.

The Pro•Dual Pec/Delt Machine features uniquely designed articulating pec arms to provide optimal; pectoral and rear deltoid development and has independent range of motion adjustments to accommodate users of all sizes.

With gracefully curved frames constructed from sleek, power-coated tubing that exhibits a modern, design-forward aesthetic, the Pro•Dual Pec/Delt Machine builds form into function and value into a superior modular strength training system.

Best of all, you can buy with confidence, because the Pro•Dual Pec/Delt Machine is built to last a lifetime and is backed by the strongest warranty in the industry!

Learn More

Endurance Center Drive elliptical trainers are the perfect blend of research, engineering, performance and technology. The E5000 uses an internal generator eliminating any power requirement. Designed for extreme durability, the E5000 offers a commercial warranty.

Learn More

Angles and ergonomics are key for effective, efficient workouts of the quadriceps. Using a properly adjusted machine, a user will feel the muscles being worked as the exercise is performed.

Body-Solid's ProDual Leg Extension & Curl Machine's biomechanically accurate pivot point ensures ergonomically correct body positioning for natural and complete hamstring development.

An elliptical cam keeps the user's arc of movement smooth and provides variable resistance through a full range of motion. The recumbent DuraFirm™ back pad adjusts to fit any size user and eliminates lower back strain. The Pro•Dual Leg Extension/Leg Curl Machine also features pop-pin adjustable footpads to assure proper alignment, while the adjustable thigh pads provide stabilization during exercise. Hold-down grips provide ultimate stability for a worry-free workout.

With gracefully curved frames constructed from sleek, power-coated tubing that exhibits a modern, design-forward aesthetic, the Body-Solid Pro•Dual Leg Extension/Leg Curl Machine builds form into function and value into a superior modular strength training system.

Best of all, you can buy with confidence, because the ProDual Leg Extension & Curl Machine is built to last a lifetime and is backed by the strongest warranty in the industry!

Learn More

Effective thigh workouts require a biomechanically correct machine to keep backs, butts and knees where they belong in order to isolate the targeted area and achieve optimum results.

Body-Solid's Pro•Dual Inner Thigh/Outer Thigh Machine features a pop-in cam adjustment to users to select their own starting positional and range of motion. Four sealed, pillow-block ball bearing systems provide a smooth inner thigh and hip concentration.

The biomechanically accurate foot posts and ergonomically correct bent-knee design angled seat eliminates lower back stress. Users face forward towards the weight stack, providing easy access. The Pro•Dual Inner Thigh/Outer Thigh Machine also has no-slip handgrips to assure user stability when exercising.

With gracefully curved frames constructed from sleek, power-coated tubing that exhibits a modern, design-forward aesthetic, the Body-Solid Pro•Dual Inner Thigh/Outer Thigh Machine builds form into function and value into a superior modular strength training system.

Best of all, you can buy with confidence, because the Pro•Dual Inner Thigh/Outer Thigh Machine is built to last a lifetime and is backed by the strongest warranty in the industry!

Learn More

The upper arm is made up of two primary muscle groups—the biceps and the triceps, and it is equally important to train both. To achieve optimal results from arm exercises, it is essential to perform movements consistently and correctly every time.

Body-Solid's Pro•Dual Bicep/Tricep Machine provides a seamless change from bicep exercise to triceps exercise with dual grip handles. The adjustable seat and upper arm pad are designed to align the elbow with the rotational axis of the lifting arm. The machine's handle pivots to enhance user comfort.

With gracefully curved frames constructed from sleek, power-coated tubing that exhibits a modern, design-forward aesthetic, the Body-Solid Pro•Dual Bicep/Tricep Machine builds form into function and value into a superior modular strength training system.

Best of all, you can buy with confidence, because the Pro•Dual Bicep/Tricep Machine is built to last a lifetime and is backed by the strongest warranty in the industry!

Learn More

The Body-Solid Pro•Dual Vertical Press and Lat Station offers a space-saving solution for your people to focus on their chest and upper body with additional emphasis on their triceps and shoulders.

Biomechanically designed for maximum chest concentration and outstanding muscle development, the versatile machine offers a single station footprint that delivers multiple functionality, including mid-row, shoulder press, lat pulldown and incline press. Multiple press handles provide users of all sizes with different grip angles to create variable exercises to concentrate on distinct areas of the chest and triceps.

The Vertical Press and Lat Station offers a no-cable-change design that allows you to go immediately and directly to a Long Pull/Seated Row exercise movement to further increase size, strength and endurance of your back muscles. With multiple adjustments to accommodate any size user, it can be used as a freestanding unit or as a modular component to the Pro•Dual 3-Stack and 4-Stack multi-station systems.

The Pro•Dual Vertical Press and Lat Station has a sleek, structural tube frame with a durable, powder-coated finish that exhibits a modern, design-forward aesthetic. Full shrouds and covers ensure an extra measure of safety while enhancing its modern aesthetics.

This club quality station also features impact-resistant fiberglass reinforced nylon pulleys, including precision ground and sealed bearings to ensure prolonged cable life and smooth movement. 11-gauge 2.375" x 4.625" oval tubing on the main frame, combined with 3-gauge steel connecting plates and ½" diameter connecting bolts adds to the machine's strength and durability.

The spun steel aircraft cables of the Vertical Press and Lat Station are 5.5mm in diameter and are rated to over 2500 lb., providing smooth movement and a safe workout.

Durable, electrostatically applied metallic powder coat finish with clear coat is applied to the Vertical Press and Lat Station in a two-step process, resulting in a high-quality, low maintenance finish protected from scratching, chipping and fading.

Learn More

The XT685 has the same options as the XT185, 285, 385, and 485 plus larger diameter rollers and a 2" wider belt. This model is very appealing to someone that is a walker or a runner. This model features a non-folding platform base which is designed to stand up to the rigors of frequent running.

Learn More

The PS100 easily adapts to any fitness environment and its self-generating, so placement is never a problem. And since the PS100 is safely entered from the back, only a rear aisle is needed to access the machine.

Shippable within designated dealer zone only.  If outside of Columbus, please check the manufacturer website to find the closest dealer. If no dealer within
75 miles, feel free to contact us for a quote.

Learn More

The Next Generation of Smith is the Jones! 3-D Technology Patented* 3-D barbell motion provides for an almost unlimited array of exercises. Smith Machines move vertically only. The Jones moves both vertically and horizontally, allowing for natural, unlimited, user-defined motion. Because the body's natural movements can be utilized within the Jones, all free weight exercises can be performed.

Optional lat attachment (JLC-LAT) and functional cable columns (JLC-FNCT).

Learn More

In only a 3' x 4' area, you can perform an unlimited amount of exercises that will sculpt your body into statuesque form, safely and quickly. Dual 160 Lb. weight stacks offer a resistance range fit for beginners and professional athletes alike.

With a simple pop-pin adjustment, the vertically adjustable pulleys can be set for over 100 exercises at a level that is comfortable for any size user. When it comes to stability and durability, Body-Solid can't be beat with heavy gauge 2" x 4" mainframe construction and aircraft quality cables and pulleys.

Learn More